General site preparation
Pool base options, soil conditions, drainage, equipment space and getting ready for delivery.
Download PDF ↓Read online ↗Tru Blu support / installation
Place. Connect. Enjoy.
Install your kit yourself with our guides and support, or use them to coordinate your installer. Start with site preparation, then work through placement, connections and commissioning. Use our illustrated manuals for set-out drawings, circulation diagrams, fitting details and printable job records. Download a PDF or follow the same steps online.
Prepare the base. Plan the connections.
A compacted road-base foundation or reinforced concrete slab can suit your pool, depending on the ground and supplied foundation detail. Prepare continuous, flat and level support, retain granular edges, direct runoff away and leave room to service the equipment.
Start with general site preparation ↗Keep a copy with your project
Installation guide downloads
Plumbing connections
Circulation layout, pressure pipework, isolation, service unions and leak checks.
Download PDF ↓Read online ↗Equipment installation
Pump and filter setup, vertical UV installation and the optional Insnrg heat pump.
Download PDF ↓Read online ↗Fitting installation
Supplied seals, skimmer and return fittings, supported connections and suction safety.
Download PDF ↓Read online ↗Deck & recessed installation
Independent deck support, retaining works, drainage and accessible services.
Download PDF ↓Read online ↗LED light installation
Light mounting, cable routes, compatible driver and licensed electrical work.
Download PDF ↓Read online ↗Commissioning & checklist
Before-fill checks, operating waterline, startup, water testing and owner handover.
Download PDF ↓Read online ↗Approvals, made clearer.
Eligible NSW projects may use a CDC through a suitably registered independent certifier or council. We can advise accordingly upon purchase. Arrange the approval, barrier and required inspection sequence before installation.
Explore planning & approval FAQs ↗Detailed installation steps
01 / installation
General site preparation
Prepare the pool base, equipment area and service routes before delivery. Start here whether you are installing the kit yourself or engaging an installer.
Read guide ↗02 / installationDeck and recessed installation
Plan the pool, independent deck structure, retaining works and drainage together before excavation.
Read guide ↗03 / installationFitting installation
Fit and inspect the supplied skimmer and return components without changing the engineered suction arrangement.
Read guide ↗04 / installationLED light installation
The lighting upgrade includes one underwater light and its transformer/control package. Plan cable access before the shell is filled.
Read guide ↗05 / installationHeat pump installation
Prepare an outdoor position and install the optional Insnrg Hi35 to the supplied heating layout.
Read guide ↗06 / installationPlanning an installation
A practical sequence from choosing your pool to arranging the first fill.
Read guide ↗07 / installationSite suitability
Check the ground, access and surroundings before committing to a pool position.
Read guide ↗08 / installationGround preparation
Clear, form, compact and protect the pool footprint before placement.
Read guide ↗09 / installationFoundation requirements
A firm, flat base must support the full pool floor and perimeter. A properly prepared granular base can be an alternative to concrete on suitable sites.
Read guide ↗10 / installationDelivery and handling
Arrange third-party freight and safe unloading before the pool leaves production.
Read guide ↗11 / installationPositioning the pool
Set the shell on its prepared base with the fittings facing the planned service routes.
Read guide ↗12 / installationPlumbing connections
Connect the supplied circulation equipment with supported pressure pipework and accessible isolation points.
Read guide ↗13 / installationPump and filter installation
Mount, connect and commission your circulation pump and cartridge filter with room for routine service.
Read guide ↗14 / installationUV system installation
Install the included Insnrg Ui in its intended return-line position and preserve access to the lamp.
Read guide ↗15 / installationSkimmer installation
Keep the integrated skimmer accessible and operating at the correct waterline.
Read guide ↗16 / installationFilling and commissioning
Move from a completed installation to clear, circulating water and a documented handover.
Read guide ↗17 / installationPool safety
Arrange barriers, inspections and daily safe access alongside the installation.
Read guide ↗18 / installationInstallation checklist
Use this checklist to coordinate DIY tasks, trades, delivery and handover.
Read guide ↗Need help with your site?
Send your preferred pool size, installation suburb and access photographs. We’ll help you plan the next step.
Make it yours ↗